The #1 Online Comunity for Airsoft Teams

Goggles/Masks Fogging, what is the solution???? .......

I've tried "defogging" sprays but it doesn't work. Anyone else have this problem? Anyone know what to do to solve it?

Permalink Reply by Capt.Firedog on July 27, 2008 at 10:13am: Thanks Ripper,i'll give it a try how about if they wear glasses should they do the same while wearing glasses under goggles; ▶ Reply to This

Permalink Reply by B3ND3R on July 27, 2008 at 1:53pm: Gunny built 3 CPU fans on his goggles and it seemed to work great for him. So well i'm going to build a set on my goggles.; ▶ Reply to This

Permalink Reply by Capt.Firedog on July 27, 2008 at 8:48pm: any plans or wiring diagrams available; ▶ Reply to This

Permalink Reply by B3ND3R on September 21, 2008 at 5:01pm: There is no diagrams for this that I know of you play it by ear. G&G makes a fan http://www.airsoftgi.com/product_info.php?products_id=3001; ▶ Reply to This

Permalink Reply by Capt.Firedog on September 21, 2008 at 7:00pm: GREAT ! Thanks B3ND3R; ▶ Reply to This

Permalink Reply by Arthur "Lex" Lowther on September 23, 2008 at 8:00am: Also a quick and cheap way to keep them from fogging is get some gillette shave gel, foam it in your hand and apply it to the inside of your goggles. wait about a minute to let it dry the remove it with a soft cloth.

works perfect. I've done it to alot of my goggles and never had an issue with fogging up after that ever.; ▶ Reply to This

Permalink Reply by Talon on September 24, 2008 at 5:10am: I have Arena Fakjaks, they have vents on the top and bottom. I pop out the vents on one side to allow more air movement. They are still hot and sweat builds up, but its alot better. I just wear safety glasses when ANSIs aren't required.; ▶ Reply to This

Permalink Reply by Capt.Firedog on September 24, 2008 at 7:25am: Working on getting fan ,everyones sold out ,already tried taking out vents did'nt help much I think it's the glasses inside goggles causing some sort of thermal event.I will try the gillette while waiting for fan.Thanks everyone; ▶ Reply to This

Permalink Reply by oneshot6kills on December 17, 2008 at 4:18pm: i have some classic army goggle that dont seem to really fog up or im just used to it idk; ▶ Reply to This

Permalink Reply by Malone on December 17, 2008 at 11:39pm: wiremesh... wiremesh.... wiremesh.....

http://www.cspoutdoors.com/sigshielprot.html get the 20 threads per inch and you are good... end of story... no more worries, no more wiping out the inside of your goggles risking getting hit in the eye in the middle of a game... nothing.

Don't believe me?

http://actualairsoft.com/wp/?p=20#more-20

I tried multiple kinds of goggles and snake oil to keep goggles from fogging before. Yes the CPU fans will probably work... but why go through all that?

Get wiremesh.; ▶ Reply to This

Permalink Reply by Capt.Firedog on December 18, 2008 at 5:29pm: We use bio bb's due to the fact that I border a quarry that my water comes from and a private park that's kind enough to let us play with bio only; ▶ Reply to This

Permalink Reply by Talon on December 20, 2008 at 6:14am: Sealed ansi rated goggles are required at most fields. It's a requirement by the insurance companies.; ▶ Reply to This